Blind stitchThe authorised Tony distributor

Industrial blind stitch machines Tony, for hems that do not show

A blind stitch machine hems trousers, skirts and jackets so the stitch stays out of sight. Its curved needle catches only part of the cloth, so the right side shows little or no stitching and the hem comes off the hand-finishing table. We supply blind stitch machines for garment and curtain hems, install them and train your operators.

We quote in AED by quantity, table and delivery, and reply within one working day. Machines for a whole line are quoted together.

  • 1987the year Al Borj began supplying garment factories
  • 5,000+factories supplied in the Middle East and Africa
  • 2offices: UAE and Ghana
  • 1 dayusual reply time for an AED quotation on WhatsApp

Blind stitch machines by job

Grouped by the hem each machine is built for. Open any machine for its specifications and catalogue.

Machine type

Blind stitch machines for garment hems

1 machine

A curved needle catches only part of the cloth, so trouser, skirt and jacket hems show little or no stitching on the right side. Blind stitch machines compared

Blindstitch unit for curtain hems

1 machine

An Eisenkolb unit that mounts on the XCP-3000 conveyor table, for invisible hems on fine curtain fabric. Curtain making machines

Not listed? Send us the model number on WhatsApp and we will check it for you. Ask on WhatsApp

Blind stitch machines compared

Both machines are read on the same rows. Scroll sideways to see each one.

Machine type

Blind stitch machines side by side

Model Tony H-101TonyH-101 Eisenkolb BCP-3000EisenkolbBCP-3000
Best forHems that must not show on the face of the garment: trousers, skirts, jackets and curtains, in extra-thin to heavy clothA dedicated blind hem line for fine curtain fabric in a curtain workshop: hotel, residential and made-to-measure curtains
Built asA blind stitch machine head with one curved LWx6T needle, sizes #9 to #14A blindstitch sewing unit that mounts on the XCP-3000 conveyor table, 550 x 160 cm
Controls and settingsSkip stitch 1:1 or 2:1; stitch length up to 8 mm; presser foot height 12 mmTouch screen control, with optional remote access for technical support; four preset machine heights
Options and handlingManual (TM) or electric (TE) thread trimmer and electric presser foot lifter (UE); H-101-M-TEC build with electronic tacking and a safety stitchThe sewing unit lifts out electrically for threading and cleaning, and the unit exchange takes under 60 seconds
Where it sitsIn the finishing section, after the garment is assembledIn the curtain workshop, supplied fitted and tested on its XCP-3000 conveyor table
Catalogue and priceCatalogueAED price on WhatsApp AED price on WhatsApp

The Tony H-101 is a machine head for garment hems. The Eisenkolb BCP-3000 is a sewing unit for the XCP-3000 conveyor table, so it is supplied fitted on that table.

Related machines and guides

Which blind stitch machine for which hem

Start from the hem. If your job is not listed, send us the garment and the fabric on WhatsApp.

What you hemBlind stitch typeModels
Trouser, skirt and jacket hems, from extra-thin to heavy cloth Blind stitch, with skip stitch 1:1 or 2:1 Tony H-101
Medium and heavy cloth where the hem ends must be locked H-101-M-TEC build: electronic tacking and a safety stitch Tony H-101
Curtain hems on fine curtain fabric Blindstitch unit on a conveyor table Eisenkolb BCP-3000

Hem machines sit in the finishing section, after the garment is assembled. We quote them with the rest of the line.

How many blind stitch machines a line needs

The hem is stitched in the finishing section, after the garment is assembled, so a line needs only a few blind stitch machines: 2 of 33 on a trouser line and 2 of 14 on a skirt line. We size each line to your garment, fabric and daily target.

Trousers with blind-stitched hems, Juki

Tailored trouser line

33operators

Trousers: where each machine works, numbered as in the list 12345678

The hem machines sit in the finishing section, after the trousers are assembled.

Skirts, Juki

Skirt line

14operators

Jackets add the same hem machine for the sleeve and body hems and the lining.

Send us the garment, the fabric and your daily target on WhatsApp. We work out the machines for each operation and quote the whole line together in AED, with delivery, installation and operator training.

Get a quote for a whole line

Delivery, installation and spare parts for Tony and Eisenkolb

Buying the machine is the start. Our own technicians deliver it, set it up, train the people who run it and keep it running, from our offices in the UAE and Ghana.

5,000+factories supplied by Al Borj in the Middle East and Africa since 1987

  1. 01

    Machine selection

    Send us your garments, fabrics and target output. We recommend the blind stitch machines, versions and attachments before you buy, so each station gets the machine its operation needs.

  2. 02

    Delivery to your factory

    We ship from Sharjah across the UAE and the GCC and to Africa, including Accra, Nairobi, Addis Ababa, Cotonou and Lomé, with the machines and their stands quoted together.

  3. 03

    Installation and commissioning

    Our technicians set each machine up, adjust it for your fabric and thread and test it before handover, so the line can start work the same week.

  4. 04

    Operator and mechanic training

    Hands-on training for operators, and on daily care and adjustment for your mechanics, so small faults are put right on the floor instead of waiting for a visit.

  5. 05

    Warranty and maintenance contracts

    Warranty claims are handled by our own service team, with the maker behind us. Service visits, repairs and annual maintenance contracts cover single machines or whole lines.

  6. 06

    Genuine parts

    As the authorised Tony and Eisenkolb distributor, we supply genuine parts and attachments from Sharjah, quoted by part number, so a repair uses the part the machine was built with.

Catalogues

Each machine's catalogue page has its key figures and the maker's own PDF. The brand pages list every machine we supply.

Questions about blind stitch machines

Something else? Ask us on WhatsApp and a specialist replies, usually within one working day.

Ask on WhatsApp

What is a blind stitch machine?

A blind stitch machine hems a garment so that the stitch does not show on the face. One curved needle catches only a few threads of the outer cloth and the stitch stays hidden inside the fold, so the right side shows little or no stitching. It makes the clean hems on trousers, skirts, jackets and curtains.

How does an invisible hem work on trousers, skirts and jackets?

The operator folds the hem and guides it under the foot. The curved needle picks up the folded edge and only part of the outer cloth, never going right through, so nothing shows on the right side. That takes hemming off the hand-finishing table. On a factory line the machine sits in the finishing section, after the garment is assembled.

Which blind stitch machine do you supply for garment hems?

The Tony H-101. It runs up to 2,500 stitches a minute with a stitch up to 8 mm long and is rated for extra-thin to heavy material. The H-101-M-TEC build adds electronic tacking and a safety stitch for medium and heavy cloth, and Tony offers a manual or electric thread trimmer and an electric presser foot lifter as options.

What is skip stitch and when should I use it?

The Tony H-101 sews either 1:1, where the needle catches the cloth on every stitch, or 2:1, where it catches the cloth on every second stitch. Skip stitch leaves fewer catch points on the right side, which helps on fine and light fabric. Use 1:1 on thicker cloth for a firmer hem.

Can a blind stitch machine hem curtains?

Yes. The Tony H-101 also hems curtains. For a curtain workshop, the Eisenkolb BCP-3000 mounts on the 550 x 160 cm XCP-3000 conveyor table and gives it a dedicated blind hem line for fine curtain fabric, with the stitch hidden on the face. Its sewing unit lifts out electrically for threading and cleaning. See our curtain making machines.

What is the price of a blind stitch machine in the UAE, Saudi Arabia, Oman, Bahrain, Kuwait or Qatar?

It depends on the model, the version and how many you need. Send us the model, or what you make and how many pieces a day, on WhatsApp and we send an AED quotation with delivery and installation, usually within one working day. Machines for a whole line are quoted together.

What is the price of a blind stitch machine in Ghana, Kenya or Ethiopia?

It depends on the model, the quantity and the delivery to your city, for example Accra, Nairobi or Addis Ababa. Send us your list on WhatsApp and we reply within one working day with an AED quotation for the machines, delivery and installation. Our Accra office looks after West Africa.

Which needle does a blind stitch machine use?

The Tony H-101 uses the LWx6T needle system, a curved needle, in sizes #9 to #14. We supply Organ needles and Amann threads with the machines, so a new line starts with the right needle and thread.

Do you install the machines, train our operators and supply spare parts?

Yes. Our technicians deliver each machine, set it up on its table and stand, adjust it for your fabric and test it before handover. They train your operators on folding the hem, skip stitch and needle depth. Warranty claims are handled by our own service team, and we supply genuine spare parts from Sharjah, quoted by part number.

Do you deliver blind stitch machines outside the UAE?

Yes. We ship from Sharjah across the Middle East and Africa, including Saudi Arabia, Oman, Iraq, Ghana, Kenya, Ethiopia, Tanzania, Benin, Togo, Ivory Coast and Tunisia. We have offices in the UAE and Ghana and a presence in Kenya, and we install every machine at your factory.

Get a blind stitch machine quote on WhatsApp

Send the model, or what you make and how many pieces a day. We reply with the AED price and delivery time, usually within one working day.

Showroom
Showroom #4, Al Borj Showrooms, Industrial Area 4, Sharjah
West Africa
Accra office, +233 591 896 086

Our showroom, Industrial Area 4, SharjahOpen in Google Maps