FK Group The authorised FK Group distributor
FKGroupUltracut-ML Single Ply Automatic Cutting System
Also listed as Ultracut ML, UltracutML, Ultracut-ML and FK Ultracut
A single ply automatic cutting system with an oscillating blade, for leather, technical fabric and composite parts. Suction holds the material, so FK Group states it can be cut without plastic film.
Built for Industrial cutting machinesTechnical textilesAutomotive interiors
Price in AED on request. We reply with the price and delivery time, usually within one working day. Machines for a whole line are quoted together.

- 132m/minCutting speed, maximum
- 0.05mmAccuracy, plus or minus
- 18,000rpmOscillating blade, maximum
- 20mmCutting thickness, maximum
- 5,000+factories supplied by Al Borj in the Middle East and Africa
The Ultracut-ML up close
1 photo · tap to enlargeThe FK Group Ultracut-ML in 30 seconds
What it is
FK Group's Ultracut-ML is a single ply automatic cutting system with an oscillating blade and four working areas from 120 x 150 cm to 190 x 250 cm.
Who it's for
Factories in the UAE, the GCC and Africa that cut leather, technical fabric or composite parts one ply at a time.
Why this model
Choose it for accuracy on single plies: FK Group states plus or minus 0.05 mm, a speed of 132 m per minute and an acceleration of 8 m per second squared.
Setting up a factory line with the Ultracut-ML
We quote by the line and stay with you after the machines are running.
- 01
Factory assessment
We look at what you make, your daily output target and your floor, then recommend the machine mix for each line.
- 02
Quote by the line
Machines, delivery and installation in one AED quotation.
- 03
Installation and training
Our technicians set up every machine at your factory and train your operators on site.
- 04
Parts and maintenance
Spare parts and annual maintenance contracts for every machine on the floor.
What the Ultracut-ML does on a factory floor

Oscillating blade
Blade running to 18,000 rpm
FK Group fits an oscillating blade with a maximum speed of 18,000 rpm and a maximum cutting thickness of 20 mm.
On the factory floorThe blade oscillates at high speed, so it can cut a single ply of thick material cleanly in one pass.

Suction
Cut without plastic film
FK Group states that the homogenous suction is designed so material can be cut without plastic film over it.
On the factory floorBecause no plastic film is needed, there is no film to lay and remove for each ply, so material is cut straight from the roll.

Accuracy
Plus or minus 0.05 mm
FK Group publishes a cutting accuracy of plus or minus 0.05 mm, a maximum cutting speed of 132 m per minute and a maximum acceleration of 8 m per second squared.
On the factory floorThe published accuracy keeps part sizes consistent, so parts match when they reach the assembly line.
Four working areas
120 x 150, 150 x 250, 170 x 250 and 190 x 250 cm. Send us your part drawing and material and we quote the right one.
FK Group Ultracut-ML specifications
Cutting
| Type | Single ply automatic cutting system |
|---|---|
| Maximum cutting speed | 132 m per minute |
| Maximum acceleration | 8 m per second squared |
| Cutting accuracy | Plus or minus 0.05 mm (FK Group states) |
| Maximum oscillating blade speed | 18,000 rpm |
| Maximum cutting thickness | 20 mm |
| Working areas | 120 x 150, 150 x 250, 170 x 250 and 190 x 250 cm |
Size and power
| Overall dimensions | 286 to 386 cm long, 199 to 269 cm wide, 130.1 cm high |
|---|---|
| Weight | 2000 kg |
| Installed power | 18 kW |
| Average consumption | 13 kW |
| Power supply | 400 V plus or minus 10 percent, 50 to 60 Hz |
| Compressed air | 300 Nl per minute at 8 bar |
| Standards | CE UNI EN 292/1, 292/2, 349 and 294, noise under 85 dB |
Figures as published by FK Group on its product page. FK Group may change specifications without notice.
Included with every Al Borj machine
- Delivery across the UAE and the wider Middle East and Africa
- Installation at your factory
- Operator training on site
- Genuine spare parts
- Annual maintenance contracts (AMC)
Questions about the FK Group Ultracut-ML
Anything else, ask us on WhatsApp. We usually reply within one working day.
Ask on WhatsAppIs the Ultracut-ML the same as the Ultracut ML?
Yes. FK Group writes it Ultracut-ML, and people also type Ultracut ML or UltracutML. FK Group's product page is headed Ultracut.
Does it cut more than one ply at a time?
No. It is a single ply system. For lays of many plies, look at FK Group's conveyor systems such as the Universal Cutting System.
What does it need in air and power?
FK Group lists 18 kW installed power, 400 V plus or minus 10 percent at 50 to 60 Hz, and compressed air of 300 Nl per minute at 8 bar.
What is the price of the FK Group Ultracut-ML in the UAE, Saudi Arabia, Oman, Bahrain, Kuwait or Qatar?
It depends on the quantity, the options and where it is delivered. For a factory line we quote all the machines together. Send your city and quantity on WhatsApp or through the enquiry form and we reply with the AED price and delivery time, usually within one working day.
Can you equip a whole line, not just this machine?
Yes. Tell us what you make and your daily output target. We recommend the machine mix for the line and can visit your factory for an assessment first.
Do you deliver the FK Group Ultracut-ML and train our operators?
Yes. We ship from Sharjah across the UAE, the GCC and Africa, and we have offices in the UAE and Ghana. We install the machine at your factory and train your operators, then support you with spare parts and service.
Can I see the FK Group Ultracut-ML before I buy?
Book a visit to our showroom in Industrial Area 4, Sharjah. Tell us the model first so we can confirm what we can show you, and bring a sample of your own material.
Talk to an FK Group specialist in our Sharjah showroom
Tell us your material, lay height and daily output. We go through the working area and options with you, and quote in AED. Bring your part drawings.
-
Sharjah, UAE
Head office and showroom
Showroom #4, Al Borj Showrooms, Industrial Area 4, P.O. Box 28551, Sharjah -
Accra, Ghana
West Africa office
1 Kpentenplebi Link, Dzorwulu, Accra
Our showroom, Industrial Area 4, SharjahOpen in Google Maps
