NiSHO The authorised NiSHO distributor

NiSHONH-PFF-3210 Trouser Finisher for Jeans and Cotton Trousers

Also listed as NH-PFF-3210, NHPFF3210, NH PFF 3210, PFF-3210 and PFF3210

A trouser finisher for jeans and cotton trousers. It clamps a pair at the waist and legs, tensions it and finishes it with steam and air, so one operator finishes a pair without pressing it on a table.

Built for Garment factoriesLaundry and finishingManufacturing automation

Price in AED on request. We reply with the price and delivery time, usually within one working day. Machines for a whole line are quoted together.

  • 100pcs / hOutput
  • 480-1430mmWaistband
  • 5-7.5barSteam
  • 190kgWeight
  • 5,000+factories supplied by Al Borj in the Middle East and Africa

The NH-PFF-3210 up close

1 photo · tap to enlarge

The NiSHO NH-PFF-3210 in 30 seconds

What it is

A trouser finisher with touch screen control, electronic timing for steam, air and clamp opening, and adjustable waist and leg tensioning.

Who it's for

Jeans, trouser and uniform factories in the UAE, the GCC and Africa with a finishing line.

Why this model

Choose it when trouser sizes run mixed: waistbands from 480 to 1430 mm are taken without adjustment, so the operator does not reset between sizes.

Setting up a factory line with the NH-PFF-3210

We quote by the line and stay with you after the machines are running.

  1. 01

    Factory assessment

    We look at what you make, your daily output target and your floor, then recommend the machine mix for each line.

  2. 02

    Quote by the line

    Machines, delivery and installation in one AED quotation.

  3. 03

    Installation and training

    Our technicians set up every machine at your factory and train your operators on site.

  4. 04

    Parts and maintenance

    Spare parts and annual maintenance contracts for every machine on the floor.

What the NH-PFF-3210 does on a factory floor

NiSHO NH-PFF-3210 trouser finisher for jeans and cotton trousers

Clamp, tension, finish

Steam and air finish the pair on the machine

The finisher clamps the trousers at the waist and legs, tensions them and finishes them with steam and air.

On the factory floorBecause the machine holds and tensions the pair, one operator finishes it without pressing on a table.

NiSHO NH-PFF-3210 trouser finisher for jeans and cotton trousers

Mixed waist sizes

480 to 1430 mm without adjustment

NiSHO states the machine takes waistbands from 480 to 1430 mm without adjustment.

On the factory floorBecause no adjustment is needed across that range, sizes can run mixed and the operator does not stop to reset.

NiSHO NH-PFF-3210 trouser finisher for jeans and cotton trousers

Electronic timing

Steam, air and clamp opening are timed

Touch screen control with an electronic counter sets the timing for steam, air and clamp opening.

On the factory floorBecause the timing is set electronically, each pair gets the same finish and supervisors can read the count from the screen.

  • 1-year warranty

    This machine carries a 1-year warranty from Al Borj, the authorised NiSHO distributor.

See the NH-PFF-3210 at work

NiSHO NH-PFF-3210 specifications

Output

Output100 pieces an hour
Waistband range480 to 1430 mm

Utilities

Steam5 to 7.5 bar
Air0.7 MPa
Vacuum1.5 kW
Voltage380 V

Size and weight

Weight190 kg
Dimensions850 x 850 x 1750 mm
Packing size1100 x 1000 x 2000 mm

Figures as stated by NiSHO for this model.

Included with every Al Borj machine

  • Delivery across the UAE and the wider Middle East and Africa
  • Installation at your factory
  • Operator training on site
  • Genuine spare parts
  • Annual maintenance contracts (AMC)

Questions about the NiSHO NH-PFF-3210

Anything else, ask us on WhatsApp. We usually reply within one working day.

Ask on WhatsApp

Is the NHPFF3210 the same as the NH-PFF-3210?

Yes. NHPFF3210, NH PFF 3210 and NH-PFF-3210 all mean the same NiSHO trouser finisher.

What waist sizes does the NH-PFF-3210 take?

NiSHO states waistbands from 480 to 1430 mm without adjustment.

What utilities does the NH-PFF-3210 need?

NiSHO lists steam at 5 to 7.5 bar, air at 0.7 MPa, a 1.5 kW vacuum and a 380 V supply.

What is the price of the NiSHO NH-PFF-3210 in the UAE, Saudi Arabia, Oman, Bahrain, Kuwait or Qatar?

It depends on the quantity, the options and where it is delivered. For a factory line we quote all the machines together. Send your city and quantity on WhatsApp or through the enquiry form and we reply with the AED price and delivery time, usually within one working day.

Can you equip a whole line, not just this machine?

Yes. Tell us what you make and your daily output target. We recommend the machine mix for the line and can visit your factory for an assessment first.

Do you deliver the NiSHO NH-PFF-3210 and train our operators?

Yes. We ship from Sharjah across the UAE, the GCC and Africa, and we have offices in the UAE and Ghana. We install the machine at your factory and train your operators, then support you with spare parts and service.

Can I see the NiSHO NH-PFF-3210 before I buy?

Book a visit to our showroom in Industrial Area 4, Sharjah. Tell us the model first so we can confirm what we can show you, and bring a sample of your own material.

What warranty comes with the NiSHO NH-PFF-3210?

A 1-year warranty, handled by our own service team, who also install the machine.

See the NH-PFF-3210 sew in our Sharjah showroom

Book a time on WhatsApp and watch the machine run before you order.

Our showroom, Industrial Area 4, SharjahOpen in Google Maps